As an experienced partner in the field of textile printing, STAHLS offer you all the accessories you will need to complete a professional finish.

Whether you are searching for a cover sheet, platen cover, heat tape, heat platen cleaner, or interchangeable lower platens, we can supply whatever your needs.

Hotronix® Heated Lower Platen


Confidently tackle delicate polyester and tri blends with the fully threadable bottom heated platen. Heat from the lower platen melts vinyl adhesive, allowing a lower application temperature from the top platen. Compatible with any Hotronix Clam manufactured after 1990, including the Hotronix Sprint Mag, MAXX Clam, and Fusion models.


  • Anti-static Quick Slip platen protector
  • Separate digital mirco-controller
  • Fully threadable heated bottom platen melts adhesive from below reducing high heat from the upper platen to protect sensitive polyester pieces
  • Dedicated 20 amp circuit required#
  • 2 year warranty included

You’ll find your model and serial number on the base of the heat press. The heated lower platen is compatible with models: STX, MAXX, XRF, XRF2, XRS, XS.

STAHLS’ EZ Weeding TableTM

ezweedingtable_front ezweedingtable_site ezweedingtable_flat ezweedingtable_example

The EZ Weeding Table facilitates weeding of CAD-CUT(R) materials by slightly heating them. The 51×91 centimeters (26“x36“) weeding area can be inclined for comfortable and ergonomic working.

A clamp holds the material in place so it can’t slip while weeding. The weeding table has three temperature settings from 43 °C (110 °F for finely detailed designs) to 54 °C (130 °F for maximum productivity on larger jobs). The bond between the heat transfer material and its carrier lessens when heated. This patented table thus promotes removal from the carrier, resulting in easier weeding with less material breakage.

A built-in storage compartment hold often-used accessories such as the EZ Weeder.

Technical Data:

  • Weight: 12 kg (27 pounds)
  • Measurements: L 100cm x B 70cm x H 10cm (39″L x 27.5″W x 4“H)
  • Working Area: 51cm x 91cm (26“x36“)


Lift your heat press up to the next level


With the new Caddie™ you will no longer experience any probelms when sliding garments of various sizes onto the lower heat platen! The Caddie™ will make your Sprint® Maxx™ Clam Mag much more flexible. As an exmaple, note that you can now print on both the front and the back of the garment without having to remove it from the platen, which means that you can save up to 40% of your production time!

Additionally, the operating height of the press can be adjusted to suit the operator, and the Caddie™ is fully mobile because it has castors. This enables you to locate the press anywhere you wish it to operate it, at any time.  Adjustments may be nade to the stand and take just a few moments, simply and easily. And the mobility of the Caddie™ ensures simple and safe working.

To assemble the Caddie™ only one wrench is needed. Heat Transfer presses must be purchased separately. It is not suitable for the Cap Press or the 15x 15cm press. If you have any questions please contact us!

Shipping Dimensions: 84 x 84 x 31cmCounter Caddie
Shipping Weight: 27kg.




Hotronix® Caddie™ Shelves

Keep garments and materials within reach – wherever you are.
Blank garments, transfers, and accessories are always within reach with these strong, durable shelves.

  • Compatible with Hotronix® Heat Press Caddie™ stand or Air FUSION® heat press pedestal stand
  • Easily attachable
  • Rotatable trays (portrait or landscape)



Equipment Cart

Always have your heat press, laser printer, DTG printer, or whatever equipment you need nearby with this adjustable height, portable cart.

  • Heavy-duty steel cart with powder coated finish
  • Adjustable height from 17″ to 35″ (42-89 cm) makes it comfortable for any user
  • Swivel caster wheels allow you to move equipment around your shop or to events, and lock to ensure stability once you’re there
  • Holds up to 600 lbs /272 kg of equipment which makes it a perfect fit for the Hotronix® Dual Air Fusion™

Interchangeable Lower Platens

When using interchangeable lower platens, you can then print a variety of garments in different sizes.

Sprint® Mag/MAXX™ Clam/Hotronix® Fusion™/Air Fusion™sprint_mag_maxx_clam

  • 18cm (round)
  • 10 cm x 10 cm
  • 15 cm x 25 cm
  • 20 cm x 25 cm
  • 28 cm x 38 cm
  • 40 cm x 40 cm
  • 40 cm x 50 cm
  • UMBRELLA PLATENS: 40 cm x 40 cm, 40 cm x 50 cm
  • SHOE PLATEN: 15 cm x 38 cm
  • SLEEVE/LEG PLATEN: 15 cm x 51 cm

Sprint® Mag Cap/MAXX™ Cap/Clam Basic Cap

  • sprint_mag_cap_maxx_cap_clam_basic_cap6,0 cm x 8,0 cm
  • 7,0 cm x 16,0 cm
  • 7,5 cm x 14,5 cm
  • 9,0 cm x 16,0 cm
  • 10,0 cm x 16,0 cm
  • 10,0 cm x 22,0 cm

Quick slip protectors

Fits perfectly over the lower platen, and makes it very easy to slide garments over the platen, as the non-stick coating reduces the amount of friction between the garment and the platen.

  • Simple to clean
  • Do not use with sublimation

Available in four sizes:

  • 28 cm x 38 cm
  • 38 cm x 38 cm
  • 40 cm x 40 cm
  • 40 cm x 50 cm

Heat Press Platen Covers

Upper Platen Cover
The upper platen cover is much like the lower platen cover, but fitted for the upper platen. It protects the upper platen from residue, inks, and other adhesives. While it doesn’t replace the need for a non-stick cover sheet, many heat printers find it useful. Direct-to-garment and sublimation printers consider it an essential accessory to protect their heating element from steam and chemical buildup.

To keep the platen covers clean, simply wipe with a damp cloth to remove any residue or buildup. platen-covers 2

  • 40cm x 50cm




Non Stick Coated pressure pad

For uniform distribution of pressure, when applying over items such as buttons, zippers etc, and for applying close to V-Necks. The pads are 2cm thick, and contain inner foam; the outer pillow is made from a non-stick material.

Available in the following sizes:andruckkissen_antihaftbeschichtet

  • 41 cm x 51 cm for over sized shirts
  • 25 cm x 25 cm for youth shirts
  • 15 cm x 20 cm for shorts and shoulders
  • 13 cm x 46 cm for sleeves and legs

Available as a set of one of each size

Print Perfect Pads

Print perfect pads have a similar purpose as heat printing pillows but work differently. While heat printing pillows allow the zippers and seams to depress into the pillow, print perfect pads actually raise the printing area to work around these elements. They are also the recommended accessory for screen printed or digital transfers because they maintain even pressure.

  • 9 cm x 40 cm
  • 13 cm x 15 cm
  • 20 cm x 25 cm


Cover Sheets

Cover Sheets prevent a vacuum forming between the hot platen and the transfer. They also are used to produce different finshes and textures when printing.

Cover Sheet – Non-stick coating:abdeckbogen_antihaftbeschichtet

  • Very robust
  • any dirt can be easily removed
  • results in a slightly shiny finish
  • with a delicate texture to the surface
  • Not suitable for sublimation
  • 46 x 49 cm

Grip Cover Sheet:grip_abdeckbogen

  • a wax coated sheet
  • not suitable for use with sublimation
  • produces a slight matt finish
  • each sheet can be reused many times
  • Approx 46 x 48 cm

Grip rubber mat:grip_gummimatte

  • this high quality silicone cloth that absorbs heat very well
  • and it is ideal for one proof of transfers
  • it is specially designed for the application of CAD-CUT® materials
  • it produces a slightly textured finish

Thermal tape/Dispenserthermoband_abroller

Thermal tape:

  • used to ensure that the transfer remains correctly positoned on the garment for application
  • manufactured from heat resistant materials
  • it is perfect for use with mug transfers
  • approx 66m long


  • robust and durable construction
  • the dispenser has non-slip feet on the base

Heat Platen Cleanerheizplatten_reiniger

  • Cleans all the muck and dirt from the heat platen
  • available in packs of once

Heat Eraserreibeblock

  • suitable for cleaning the lower and heat platen
  • ideal for cooling transfers quickly
  • perfect for when printing connecting numbers and letters
  • by cooling them before removing the cover sheet

STAHLS’ EZ Weederstahls_ez_weeder

An essential tool for easy weeding of CAD-CUT® and CAD-COLOR® transfers


Use a squeegee, and you can then be sure that the heat resistant carriers (E.g. Magic Mask®) will be completely sealed with the digital transfers.  You can also use a squeegee to remove the carrier, and remove all bubbles and creases.

Sil Air


• Connection: 230V / 50 Hz
• Enginge output: 0,34 KW
• Air suction line: 50 L/min
• Air power output: 37 L/min
• Printing performance: max. 8 Bar
• Container volume: 24 L
• Sound emission: 40 dB(A)/lm
• Weight: ca. 27 KG
• Size: 40 cm x 40 cm x 60 cm

Black Panther P100-24

• Connection: 230V / 50 Hz
• Enginge output: 0,7 KW
• Air suction line: 100 L/min
• Air power output: 74 L/min
• Printing performance: max. 8 Bar
• Container volume: 24 L
• Sound emission: 42 dB(A)/lm
• Weight: ca. 43 KG
• Size: 62 cm x 31 cm x 60 cm